RSPOS-100 is a dual-function device with the capability of scanning and encoding UHF RFID tags. The device’s installation is straight forward plug & play, and does not require any additional software or drivers. It can connect to your facility’s Wi-Fi or USB port to access your choice of cloud or on-premise host application.
RSPOS-100 comes with an intuitive web-based setup software by which you can easily configure the device to seamlessly adjust it with your specific application.
Once in Scan mode, RSPOS-100 scans RFID tags and depending on system configurations, sends the captured data to the host via USB (as a keyboard) or Wi-Fi. The scanning of RFID tags can be done in Single or Continuous modes. When the Encode mode is activated, one byte of a pre-defined pattern is encoded into the target tag and the EPC is sent to the host via USB or Wi-Fi.
Snap-on installation and exceptional ergonomic design has made RSPOS-100 convenient to setup and comfortable to use. This device can easily get integrated with any third-party application through rich APIs.
|Product||UHF RFID Scanner/Encoder|
|Region||Support all regions (Global)|
|Read Range||Up to 15 cm (6 inches)|
|Input Voltage||5 VDC|
|Input Current||5VDC @ 500 mA|
|Cable Length||1.8 Meter|
|Protocol||HID Keyboard, TCP over Wi-Fi|
|Operating System||All operating systems are supported.|
|Driver||Plug & Play|
|Working Mode||Single mode
Continuous mode (Scanner)
|Reading Rate||More than 10 tags per second|
|User Feedback||Buzzer & LED|
|Operating Temperature||-20 °C to +60 °C|
|Storage Temperature||-40 °C to +85 °C|
|Dimensions||(H × W × L) 8.5 × 8.8 × 17 cm
(3.3 × 3.4 × 6.7 in)
|Colour||Gray (shown), Beige|
|SDK||Rich API for windows programmers|