RSPOS-300 is a dual-function device with the capability of scanning and encoding RFID tags. The installation is straight forward and does not require any additional software or drivers. Once connected to the power source via USB port, the user can configure the device through its built-in web configuration menu. The device can connect to your facility’s Wi-Fi and access your choice of cloud or on-premise host application. The Wi-Fi or USB communication mode is user definable.
The 2-button keypad (IN and OUT) allows you to scan and encode different patterns on the fly. Pressing the IN button in Scan mode, scans the Tag and transmits its EPC to the host application with IN mark. Pressing the OUT button does the same, however, this time the EPC is sent with OUT mark. The IN and OUT marks can be interpreted by the hosts application in different ways, depending on the specific application and designated conventions. For example in a library application, OUT is pressed when checking the books out, and IN is pressed when receiving them back. In this mode, RSPOS-300 can scan the RFID tags in single or continuous mode.
When the Encode mode is activated, pressing the IN button encodes one byte of a pre-configured pattern into the Tag’s EPC. Pressing the OUT button does the same, but encodes a different byte of data in the EPC. This encoding feature provides unique capabilities for special applications such as anti-theft system.
Snap-on installation and exceptional ergonomic design has made RSPOS-300 convenient to setup and comfortable to use. The device can easily integrate with any third-party application through rich APIs.
Model No. | RSPOS-300 |
Product | 2 button UHF RFID Scanner/Encoder |
Supported RFID Standard | EPC Gen 2 |
Connectivity | Wi-Fi, USB (user definable) |
Read Range | Up to 15 cm (6 inches) |
Protocol | HID Keyboard, TCP over Wi-Fi |
Driver | Plug & Play |
Working Mode | Single mode (scan & encode)
Continuous mode (scan) |
Reading Rate | 10 tags per second in continuous mode |
Buttons | IN, OUT (user-programmable) |
User Feedback | Buzzer & LED |
Cable Length | 1.8 Meter |
RFID Antenna Type | Integrated, Orientation-insensitive |
RFID Output Power Range | 18-25 db |
Input Voltage | 5 VDC |
Input Current | 5VDC @ 500 mA |
Operating System | All operating systems are supported. |
Operating Temperature | -20 °C to +60 °C |
Storage Temperature | -40 °C to +85 °C |
Dimensions | (H×W×L) 8.5 × 8.8 × 17 cm
(3.3 × 3.4 × 6.7 in) |
Weight | 150 g |
IP Rating | IP41 |
Colour | Grey (shown), Beige |
SDK | Rich API for quick integration |
Warranty | 12 months |
Country of Origin | Made in USA |
And any applications requiring high levels of security and access control.